Free shipping over £99
About this item
- RED DOT SIGHT MOUNT – Installing an optic on a semi-auto handgun used to require the slide to be machined to fit the optic – a costly operation that permanently alters the handgun slide; Now there’s a better way, thanks to the Pistol Red-Dot Sight Mount
- GUN COMPATIBILITY – The pistol red dot sight mount is treated with a nitride FORTRESS-FINISH to resist corrosion & match the finish of popular pistol slides; This model is compatible with Smith & Wesson M&P (excluding .22 Compact and C.O.R.E models)
- OPTIC COMPATIBILITY – Convert your gun for optics without machine-operated involvement; This sight mount plate is Trijicon RMR styled; Be sure to experience the real versatility of mounting on the shooting range with the Pistol Red Dot Sight Mount
- GREAT CONSTRUCTION – The mount is made from CNC-machined billet steel, with lightening cuts to reduce weight; Using billet steel allows the mounting plate to be thinner and lower than other aluminum designs while maintaining or exceeding the same strength
- EASY TO MOUNT – This compact mounting plate by TruGlo installation does not require specific instruments and is easy to install with basic tools; All these bring affordable versatility for shooters of different levels and possibilities
Justus Franecki –
I had to shave down some of the metal from the mount in order for it to fit my CSX but it works
Mrs. Delfina Dare I –
Dovetail Fit was perfect on the Glock 26. I did have to lightly drift the plate into place using a steel punch and small piece of electrical tape to protect the finish. The plate seems to be made of high grade steel with robust plating so no worries for me to drift the plate into place.Now for those who have no intention of returning the plate, the extra holes both on the dovetail and behind can be tapped for 6-32 x 1/4 screws for added hold down of the dovetail, which should be fully tightened. The two fore and aft screws that come with the plate are for anti-vibration stability only and should only be brought into snug contact with the slide, without tightening. I also tapped two extra holes in the front, keeping away from the radius of the Glock slide, for added anti-vibration stability.There are a few high speed videos on the net showing that all dovetail plates, steel or otherwise, benefit from having stabilization screws. The TRUGLO steel plate is the only plate I know of that comes pre-tapped for one screw each fore and aft, which really is sufficient.
Daisha Bergstrom I –
Qualifacation: I needed a reddot mount for my CZ P10C without cutting into the factory slide. I have not found it best to remove that coating for any reason. So I found this work around.I was gifted a reddot from a friend and never looked back.My testing has included your standard torture tests with racking the slide off of tables, truck tail gates, shooting frames, and my leg. My leg faired the worst because I hit it with a glance. It maintained zero to this day.Tip: This raises your height over bore significantly and you’ll need to adjust your dry fire to accomodate that.